Figure 6-35 Video OSD
Step 2. Select Front Size.
Step 3. Set time title and position.
a) Select channel title.
b) Select Turn on.
c) In Input Channel Title, enter channel name.
d) Use mouse to drag yellow box or enter coordinate directly, set channel title position.
Set time title and position. ‘
a) Click Time Title.
b) Check Turn on.
c) Check week display.
d) Use the mouse to drag the yellow box or change the regional point coordinates, select the
time the title of the position.
Set GPS title and position.
a) Click GPS Title.
b) Select Turn on.
c) Use the mouse to drag the yellow box or change the regional point coordinates, select the
time the title of the position.
Set flow info.
a) Click Flow Info.
b) Select Turn on.
d) Sele Use the mouse to drag the yellow box or change the regional point coordinates, set
flow info position.
You can click to add customized region, define OSD info.
The system supports up to 6 customized regions.
Click OK.
6.5.1.4.2 Snap OSD
Set snap OSD information and location, OSD options include time, driveways name, week, location,
speed, license plate, illegal code and other information. See Figure 6-36.
Step 1. Select Setting>ITC>OSD Config>Snap OSD.
To Next Page
Loading...