Dahua N42C3P

User's Manual
108
You need to have storage authorities to use the Manual recording mode.
Procedure
Step 1 Right-click the live page, and then select Main Menu > STORAGE > Record.
Figure 5-76 Recording mode
Step 2 Configure parameters.
Table 5-23 Recording mode parameters
Parameter
Description
Channel
Displays all the connected channels. You can select a single
channel or select All.
Recording status
●
Auto: Automatically make recordings according to the
schedule.
●
Manual: Makes a general recording within 24 hours for the
selected channel.
●
Off: Do not record.
Snapshot status
Enable or disable the scheduled snapshot for the corresponding
channels.
Step 3 Click Apply.