Dahua N42C3P

User's Manual
142
Table 5-28 Tripwire parameters
Parameter
Description
Name
Customize the rule name.
Direction
Set the tripwire direction, including A→B, B→A and A
↔
B.
Target Filter
Click and then select effective target. With Human and
Motor Vehicle selected by default, the system automatically
identifies the person and motor vehicle appeared within the
monitoring range.
4) Click OK.
Step 6 Configure alarm schedule and linkage.
Figure 5-109 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select the Enable checkbox and then click Apply.
5.9.6.2.2 Intrusion
Background Information
When the detection target passes the edge of the monitoring area, and enters, leaves or
traverses the monitoring area, the system performs an alarm linkage action.