User's Manual
274
Step 8 Click OK.
The password is reset.
Step 9 (Optional) When the system prompts whether to synchronize the password with the
remote devices accessed through the private protocol, click OK to synchronize the
password.
5.13.4 ONVIF User
Background Information
To connect the camera from the third party to the NVR via the ONVIF protocol, you need to
use a verified ONVIF account.
The default ONVIF user is admin. It is created after you initialize the NVR and cannot be
deleted.
Procedure
Step 1 Select Main Menu > ACCOUNT > ONVIF User.
Figure 5-235 ONVIF user
Step 2 Click Add.
To Next Page
Loading...
