User's Manual
190
5.9.12.1 Enabling Smart Plan
To use Analytics+ by camera, you need to enable the smart plan first. For details, see "5.9.2
Smart Plan".
5.9.12.2 Configuring Heat map
Background Information
Heat map technology can monitor the active objects distribution status on the specified
zone during a period of time, and use different colors to display on the heat map.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Heat Map.
Figure 5-155 Heat map
Step 2 Select a channel and then click to enable the function.
Step 3 Click Setting to configure the alarm schedule.
To Next Page
Loading...
