Dahua N42C3P User Manual

User's Manual
145
Table 5-29 Intrusion parameters
Parameter
Description
Name
Customize the rule name.
Action
Set the intrusion action, including appear and crossing area.
Direction
Set the direction to cross the area, including enter, exit and both.
Target Filter
Click and then select effective target. With Human and Motor
Vehicle selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
4) Click OK.
Step 6 Configure alarm schedule and linkage.
Figure 5-113 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.3 Abandoned Object Detection
Background Information
The system generates an alarm when there is an abandoned object in the specified zone.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English