Dahua N42C3P

User's Manual
278
Figure 5-240 Basic services
Step 2 Enable the system services.
There might be safety risk when Mobile Push Notifications, CGI, ONVIF, SSH and
NTP Server is enabled. Disable these functions when they are not needed.
Table 5-70 Basic service parameters
Parameter
Description
Mobile Push
Notifications
After enabling this function, the alarm triggered by the NVR
can be pushed to a mobile phone. This function is enabled by
default.
CGI
If this function is enabled, the remote devices can be added
through the CGI protocol. This function is enabled by default.
ONVIF
If this function is enabled, the remote devices can be added
through the ONVIF protocol. This function is enabled by
default.
NTP Server
After enabling this function, a NTP server can be used for time
synchronization. This function is enabled by default.
SSH
After enabling this function, you can use SSH service. This
function is disabled by default.