User's Manual
292
Procedure
Step 1 Select Main Menu > SYSTEM > General > Basic.
Figure 5-254 Basic settings
Step 2 Set parameters.
Table 5-75 Basic parameters
Enter a number for the Device.
Select a language for the Device system.
Select PAL or NTSC as needed.
Enable this function; the NVR can synchronize information with
the remote device such as Language, video standard and time
zone.
In the Instant Play box, enter the time length for playing back
the recorded video. The value ranges from 5 to 60.
On the live view control bar, click the instant playback button to
play back the recorded video within the configured time.
To Next Page
Loading...
