Dahua N42C3P

User's Manual
82
The remote devices found are displayed at the upper pane. Devices already added
are not included in the searched results.
Figure 5-55 Search device
●
For cameras accessed through private protocol, you can click LIVE and then
enter the username and password to play live video.
●
To filter the remote devices, you can enter all or part of device name in the Filter
box.
●
To filter out the uninitialized devices, click the Not Initialized tab, and then you
can initialize the devices. For details, see "5.7.1 Initializing Remote Devices".
●
To view all remote devices added through plug and play, you can click the Not
Auto Connected tab. You can remove devices added through plug and play, and
they can be automatically added again after plug and play is enabled.
Step 3 (Optional) Enable Plug and Play.
When Plug and Play is enabled, the NVR automatically adds remote devices on the
same subnet.