Dahua NKB5000-F User Manual

System Configurations 46
In the Add Type dropdown list,
 When IP Address is selected, enter device IP address.
 When Auto Register is selected, enter device registration ID. Add encoders
through auto register; the ID of auto register has to be in accordance with the
registered ID configured at encoder.
 When Domain Name is selected, the options are from the configured domain
during deployment.
Click Add. Step 6
The interface is shown in Figure 4-39.
Add a device (2) Figure 4-39
Select Device Type and enter Device Name, Alarm input/output channel, and so on. Step 7
Click OK. Step 8
Please click Continue to add if it continues to add device.
4.4.1.2 Adding Video Wall
Add a video wall layout on the platform.
Click and select Video Wall on the New Tab interface. See Figure 4-40. Step 1

Dahua NKB5000-F Specifications

General

Brand	Dahua
Model	NKB5000-F
Category	Keyboard
Language	English