Figure 5-152 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3. Congure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.7.2.7 Missing Object Detection
The system generates an alarm when there is missing object in the specied zone.
Procedure
Step 1 Select Main Menu > AI > Parameters > IVS.
User's Manual
270
To Next Page
Loading...
