Figure 5-211 Video tampering
Step 2 Select a channel, and then click to enable the function.
Step 3 Click Setting next to Schedule to congure the alarm schedule.
Step 4 Congure alarm linkage. For details, see Table 5-50 .
Step 5 Click Apply.
5.10.5.4 Scene Change
When the detected scene has changed, system performs alarm linkage actions.
Procedure
Step 1 Select Main Menu > Event > Alarm Settings > Video Detection > Scene Changing.
Figure 5-212 Scene changing
Step 2 Select a channel, and then click to enable the function.
User's Manual
335
To Next Page
Loading...
