5.10.9 Disarming
You can disarm all alarm linkage actions as needed through one click.
Procedure
Step 1 Select Main Menu > ALARM > Disarming.
Step 2 Select On for Disarming to enable disarming.
Figure 5-216 Disarming
Step 3 (Optional) To enable scheduled disarming, click Setting next to Duration of Disarm by
Period, and then set periods.
Scheduled disarming is only eective when Disarming is O.
Figure 5-217 Scheduled disarming
●
Drag your mouse to select time blocks.
●
Green blocks indicates that disarming is enabled.
User's Manual
340
To Next Page
Loading...
