Quick Start Guide
15
Figure 3-3 Initialization successful
Step 6 Click
OK
.
Enter username (admin by default) and the new password to log in to the web page.
Figure 3-4 Login page
Configuring Network Parameters
You need to configure the TCP/IP information to connect the VTO to the network. The
descriptions below are for models with a Wireless LAN card. A Wireless LAN device is optional.
Wireless LAN
Log into the VTO web page.
Select Network > Basic.
Configure the TCP/IP parameters in the WLAN section.
LAN
Log into the VTO web page.
Select Network > Basic.
To Next Page
Loading...
