Quick Start Guide
16
Configure the TCP/IP parameters in the LAN section.
Figure 3-5 Network configuration
Table 3-1 Parameter description
Parameter Description
IP Address Your planned IP address for the VTO.
Preferred DNS The default is 8.8.8.8.
Alternate DNS The default is 8.8.4.4.
Transmission
Mode
Mode 1: Multicast streaming (UDP).
Mode 2: RTSP streaming (TCP).
It is transmission Mode 1 by default.
DHCP Enable the function to get the allocated IP address for the VTO.
Configuring SIP Servers
When connected to the same SIP server, VTOs and VTHs can call each other. You can use a
VTO or
a platform as the SIP server. We recommend you use a VTO as the SIP server in the villa
scenario.
Step 1 Log in to the VTO web page.
Step 2 Select
Network
>
SIP Server
.
Step 3 Configure the parameters.
1) If the current VTO you have logged in works as the SIP server, enable SIP Server,
and then keep other parameters by default.
To Next Page
Loading...
