Quick Start Guide
17
Current VTO as the SIP server
2) If other VTOs work as the SIP server, set Server Type as VTO, and then configure
the parameters.
Do not enable SIP Server, otherwise the connection fails.
Other VTOs as the SIP server
Table 3-2 Parameter description
Parameter Description
IP Address The one that you planned for the VTO.
Port 5060 by default when a VTO works as SIP server.
SIP Domain
When the VTO you logged in works as the SIP server, leave the
SIP domain value by default.
When another VTO works as the SIP server, you can leave the
SIP domain by default or keep it null.
Username/Passwor
d
Used to log in to the web page of the VTO.
To Next Page
Loading...
