Dahua VTO1220A Quick Start Guide

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 24
The Add interface is displayed. See Figure 5-10.
Add single room number
8) Configure room information. See Table 5-3.
Table 5-3 Room information
Parameter
Description
First Name
Enter the information you need to differentiate each room.
Last Name
Nick Name
Room No.
The room number you planned.
 If you use multiple VTH devices, the room number of the
master VTH should be "room number#0", and the room
number of the extension VTH should be "room
number#1", "room number#2", and so on.
 You can have 10 extension VTH devices at most for one
master VTH.
Register Type
Select public, and local is reserved for future use.
Register
Password
Keep the default value.
9) Click Save.
The added room number is displayed. Click to modify room information, and click
to delete a room.
 Adding room number in batch
1) Configure the Unit Layer Amount, Room Amount in One Layer, First Floor Number,
and Second Floor Number according to the actual condition.
2) Click the Add at the bottom position. See Figure 5-11

Dahua VTO1220A Specifications

General

Brand	Dahua
Model	VTO1220A
Category	Intercom System
Language	English