Dahua VTO2000A-C - Page 10

10
To add the VTH to the VTO, revisit the VTO web browser and go to System Cong > Indoor Manager > Add. Input a family name, rst
name and Nickname, these are purely for reference. Enter the VTH Short number This number must match the Room Number set in
the VTH Product Info page. For details on self password see page 11.
Click OK to conrm the setting.
Repeat the process for additional monitors, each time setting the monitor to a unique IP address and Room Number.
To program the module buttons, go to System Cong > Local Cong > Facade Layout. On the module images, click the relative
buttons to assign a specic apartment number to it.
For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the
VTH, select Network and input the VTO units IP address and set Enable Status to ON.
VTH Monitor Conguration