Need help?Do you have a question about the Dahua VTO2000A-C and is the answer not in the manual?
General| Category | Video Intercom |
|---|---|
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Audio | Two-way audio |
| Ethernet | 10/100Mbps |
| Network Protocol | TCP/IP |
| Alarm Output | 1 channel |
| RS485 | 1 |
| Door Control | 1 |
| Tamper Switch | 1 |
| Power Supply | DC 12V |
Essential steps for securing the system against threats.
Guidelines for safe and proper installation and environmental conditions.
Specifications and recommendations for the device's power source.
Initial configuration and setup steps for the VTO device.
Configuration parameters specific to VTH devices running Version 3.1.
Configuration parameters specific to VTH devices running Version 4.0.
Procedures to confirm successful device setup and operation.
Details on making calls to management centers and VTH units.
Methods for unlocking doors via VTH, web interface, cards, or passwords.
Covers interface initialization, password reset, and system login procedures.
Managing user accounts, permissions, and access control settings.
Setting up IP addresses, ports, DDNS, P2P, HTTPS, UPnP, and LAN parameters.
To Next Page
