Dahua VTO2000A-C User Manual

74
Parameter
Description
Press [1] to leave a picture/message. The system will upload the
contents to FTP and messages are available at “Visitors’ Message” tab.
Upload Talk
Record
Reserved function.
Table 7-9
Click “OK” to save the settings. Step 3
7.7.6 System Time
Set system date format, time format, system time and NTP server.
Select “System Config >Local Config > System Time”. Step 1
The system displays “System Time” interface, as shown in Figure 7-36.
Figure 7-36
Set parameters and refer to Step 2
Parameter
Step 3
Description
Date Format
Set date display format, including Year-Month-Day,
Month-Day-Year and Day-Month-Year.
Time Format
Set time display format, including 12-hour standard
and 24-hour standard.
System Time
Set present system date and time of VTO.
System time shall not be changed arbitrarily;
otherwise, it may fail to inquire records and
snapshots or release info. Before changing system
time, please stop recording or disable auto snapshot.
Sync PC
Click “Sync PC”, so system time and local PC time
are consistent.
DST Enable
Some countries or regions follow daylight-saving
time (DST). Choose to enable DST or not according
to actual needs:
1. Tick “DST Enable” to enable DST function.
2. Select “DST Type”, including “Date” and “Week”.
DST Type
Start Time
End Time

Dahua VTO2000A-C Specifications

General

Brand	Dahua
Model	VTO2000A-C
Category	Measuring Instruments
Language	English