Dahua VTO2000A-C - Indoor Manager and VTH Setup

76
Figure 7-37
 Backup
Select “VTH Info”, and click “Backup”, so VTH info will make a backup in VTO.
 Restore Backup
Click “Restore Backup”, so card info and VTH info is restored to backup info.
 Export Config
Click “Export Config” to export config info and save it at local device, so as to restore config
or import into other devices.
 Import Config
Click “Import Config” to import local config files to the device, so as to restore data or
synchronize data.
 Default All
Click “Default All”. After confirmation, the device will reboot, and restore all info to default
status, except IP address.
7.8 Indoor Manager
Manage VTH info and card info in the system. Select “System Config > Indoor Manager”, and
the system displays “Digital Indoor Station Manager” interface, as shown in Figure 7-38.
Figure 7-38
7.8.1 Add VTH
 Add master VTH.
 After “Network” interface of extension VTH has added and enabled master VTH, VTO
interface will obtain extension VTH info automatically.
Click “Add”. Step 1
The system displays “Add” interface, as shown in Figure 7-39.