Need help?Do you have a question about the Dahua Modular VTO and is the answer not in the manual?
General| Category | Video Intercom |
|---|---|
| Protection grade | IP65 |
| Camera | 2MP |
| Video compression | H.264 |
| RS-485 | Yes |
| Network | 10M/100 Mbps Ethernet |
| Network protocol | TCP/IP |
| Card reading type | IC Card |
| Tamper switch | Yes |
| Power supply | DC12V/1A |
Lists essential security actions like password changes and firmware updates.
Offers optional security enhancements for network protection.
Provides an overview of the manual's content and the modular VTO.
Lists the available VTO models covered in the manual.
Offers guidance on the device upgrade process.
Explains the function of common keys used in the system.
Details signal words and their meanings for hazard warnings.
Lists changes made in different versions of the manual.
Outlines crucial operating conditions and precautions for device installation and use.
Specifies requirements for the device's power supply and connection.
Describes the modular VTO's components and system integration capabilities.
Details the various functionalities offered by the modular VTO system.
Illustrates and describes the components of the camera module.
Details the button module, including its variants and functionality.
Describes the keyboard module, including its layout and Braille features.
Explains the card swiping module and its operation.
Details the fingerprint module and its functionality.
Describes the blank module, typically used as a placeholder.
Illustrates the network setup for a single VTO to VTH connection.
Shows the network configuration for one VTO connecting to multiple VTHs.
Explains the network diagram for group calls involving multiple VTHs.
Provides step-by-step instructions for surface mounting the device.
Details the process for flush mounting the device into a wall.
Guides through initial setup and password configuration for VTO.
Guides through the initial setup and password configuration for the VTO.
Explains how to change the IP address and network settings of the VTO.
Describes how to configure LAN settings, including building and unit numbers.
Details the process of adding a VTH (indoor station) to the system.
Guides on adding and configuring various modules for the VTO.
Covers the initial setup and password binding for VTH devices.
Explains VTH network configuration, supporting static IP and DHCP.
Details how to set VTH room number, type, and master IP.
Describes how to add VTO and fence station information and bind VTH.
Covers initial setup and email binding for VTH devices in Version 4.0.
Explains VTH network configuration for Version 4.0, supporting static IP and DHCP.
Details setting VTH room number, type, and master IP for Version 4.0.
Describes how to add VTO and fence station information for Version 4.0.
Verifies VTO to VTH calls and monitoring for successful debugging.
Verifies VTO calling VTH functionality for successful debugging.
Verifies VTH monitoring VTO functionality for successful debugging.
Verifies VTO to VTH calls and monitoring for successful debugging.
Verifies VTO calling VTH for Version 4.0, indicating successful debugging.
Verifies VTH monitoring VTO for Version 4.0, indicating successful debugging.
Covers various calling methods and management centre interaction.
Explains how to call the management centre via different modules.
Details how to make a single call from the camera module to a VTH.
Explains how to make group calls with multiple VTHs.
Describes how to unlock remotely via VTH or VTS.
Explains how to unlock the door using the WEB interface.
Details unlocking the door using an IC card.
Explains how to unlock the door using the exit button.
Covers unlocking using personal, unified, or duress passwords.
Details unlocking using a personal password.
Explains unlocking with a unified password.
Describes unlocking with a duress password and its alarm function.
Guides through the initial setup and password configuration for the WEB interface.
Explains how to reset the administrator login password using a QR code.
Details how to log in to the device's WEB interface.
Explains how to add new users with specific operating authorities.
Covers modifying user details.
Details how an admin user can modify their own password and email.
Explains how admin users can modify ordinary user details.
Describes how to delete user accounts.
Guides on setting IP address, subnet mask, and default gateway.
Details how to configure FTP server settings for saving recordings and snapshots.
Explains how to set various ports for WEB interface access and streaming.
Covers configuring the Dynamic Domain Name Server for dynamic IP address access.
Explains how to enable P2P for remote access via mobile clients.
Details how to enable HTTPS for secure communication.
Guides on enabling UPnP for network mapping.
Describes how to enable UPnP mapping relations.
Explains how to add new server mapping relations.
Covers setting device information like type and reboot date.
Guides on adding various modules to the VTO's facade layout.
Details how to set the corresponding relation of call keys for modules.
Covers access control settings like unlock intervals, passwords, and card issuing.
Explains how to enable/disable various system sounds.
Details settings for auto snapshot, message, and record upload during talk.
Covers setting system date, time format, and NTP server.
Explains how to perform backup, restore, export, and import configurations.
Guides on adding master and extension VTH devices to the system.
Details how to modify VTH user information like name and nickname.
Describes how to delete VTH information.
Explains how to access and use the VTH QR code for P2P connection.
Guides on exporting device configuration for backup or transfer.
Details importing configuration files into the device.
Covers card management operations.
Explains how to report a lost card to disable its unlock functionality.
Details how to modify card information, specifically the username.
Describes how to delete card information.
Covers settings for video resolution, frame rate, bitrate, brightness, and contrast.
Explains how to adjust VTO microphone and beep volumes.
Details how to add individual IP camera information to the system.
Describes how to delete IP camera information.
Explains how to import IPC information in batches.
Details exporting IPC information for future use.
Guides on collecting fingerprints for door access.
Details how to modify fingerprint user information.
Explains how to remove individual or all fingerprints.
Guides on importing fingerprint information in batches.
Details exporting fingerprint information to a local device.
Explains how to view and export VTO call and talk records.
Guides on viewing and exporting VTH alarm records.
Details how to view and export VTO unlock records.
Describes how to reboot the device via the WEB interface.
Explains how to log out from the WEB interface.
Lists technical specifications for the VTO2000A-C model.
Lists technical specifications for other VTO models.
Provides specifications for suitable network cables.
Details specifications for extension power cords.
Lists specifications for flush mounting embedded boxes.
To Next Page
