Dahua Modular VTO User Manual

43
Figure 6-8
6.2.3 Unlock with IC Card
Swipe the authorized IC card at card swiping module, so as to open the door.
 This function is valid only when card swiping module has been connected.
 Authorized IC card refers to a card that is issued and authorized to open the door. For card
issuing operation, please refer to “6.3 Issue Card”.
6.2.4 Unlock with Exit Button
If VTO is connected with exit button, press the exit button to open the door.
6.2.5 Unlock with Password
Support to unlock with personal password, unified password and duress password.
 Personal password is set at VTH. Please refer to matched VTH user’s manual for details.
 Please refer to “7.7.3 Access Manager” for unified password and duress password setting.
Default unlock interval is 15s, and default unlock period is 2s. Please refer to “7.7.3 Access
Manager” for details.
6.2.5.1 Unlock with Personal Password
In standby mode, press , enter four-digit room no. (add 0 in front of room no. if it is less than
4 digits)+ personal password, and press again to unlock.
For example, 9901 user sets personal password to be 123456. Press #9901123456# to unlock.

Dahua Modular VTO Specifications

General

Brand	Dahua
Model	Modular VTO
Category	Measuring Instruments
Language	English