Dahua Modular VTO User Manual

45
Figure 6-10
Within 30s countdown, swipe an unauthorized card at VTO. Step 3
The system pops up “Card Info” interface, as shown in Figure 6-11.
Figure 6-11
Enter “Room No.” and “Card No.”. Click “OK”. Step 4
Cards can be swiped continuously, within a period of 30s.
Click “OK” to finish issuing card. Step 5
 Click “OK” within the countdown, so the cards will be valid. Otherwise, all card
info will be invalid.
 Click “Cancel” when issuing cards, in order to stop issuing.
6.4 Monitoring Function
Both VTS and VTH can monitor the VTO.
VTO supports multi-channel stream monitoring. Available channels vary under different video
formats. Support max. 4 channels with 720P, and support max. 6 channels with WVGA.
Video format is set as follows:
At VTO WEB interface, select “System Config >Video Set>Video Set”. Step 1
The system displays “Video Set” interface.
Select “Video Format”. Step 2

Dahua Modular VTO Specifications

General

Brand	Dahua
Model	Modular VTO
Category	Measuring Instruments
Language	English