EasyManua.ls Logo

Dahua Modular VTO - WEB Interface Login Procedure

Dahua Modular VTO
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
The system displays new password setting interface, as shown in Figure 7-6.
Figure 7-6
Set “New Password” and “Confirm”. Step 6
Password can be 8 to 32 non-null characters; it consists of letters, numbers and
symbols (except “'”, “"”, “;”, “:” and “&”). The password shall consist of 2 types or over 2
types. Please set a high-security password according to password strength prompt.
Click “OK” to complete resetting. Step 7
7.3 System Login
Please ensure that IP addresses of PC and VTO are in the same network segment; otherwise,
it fails to enter WEB login interface.
Enter IP address of VTO at the address bar of PC browser, and press [Enter] key. Step 1
The system displays WEB login interface, as shown in Figure 7-7.

Table of Contents

Related product manuals