Dahua Modular VTO - Adding Individual IPC Information

85
Figure 7-47
7.10.1 Add One IPC
Add IPC info one by one.
Add IPC directly, or add NVR/XVR/HCVR devices to obtain info about the added IPC.
Click . Step 1
The system displays “Modify” interface, as shown in Figure 7-48.
Figure 7-48
Set parameters and refer to Step 2
Parameter
Step 3
Description
IPC Name
Enter IPC/NVR/XVR/HCVR name.
IP Address
Enter IP address of the connected
IPC/NVR/XVR/HCVR.