80
Figure 7-43
Modular VTO doesn’t support main card function.
Click to report loss, and the icon is switched to . Step 2
Click to cancel the report and restore unlock function.
Click to close config interface. Step 3
7.8.6.2 Modify
Modify username of the card.
Click . Step 1
The system displays “Card Info” interface, as shown in Figure 7-43.
Click . Step 2
The system displays “Modify” interface, as shown in Figure 7-44.
Figure 7-44
Modify username of the card. Step 3
Click “OK”. Step 4
Click to close config interface. Step 5
7.8.6.3 Delete
After deletion, the card doesn’t own unlock authority.
Click . Step 1
The system displays “Card Info” interface, as shown in Figure 7-43.
Click to delete card info. Step 2
Click to close config interface. Step 3
To Next Page
Loading...