12
Figure 3- 6
Under digital indoor station interface, check display residence info enable to show
existing VTH info. Click add button at lower left, and input user info in the prompt box. In
default, only VTH short no. is mandatory.
3.3.3 LAN Config
LAN config interface is shown in Figure 3- 7.
Figure 3- 7
Default config is OK if you merely want to ensure the LAN connection between villa
VTO and VTH. If you want to config manager center, the config here must match info of
the manager center, and you need to check box of register to the MGT center.
Furthermore, if you would like to call manager center within configured period, you
have to set call VTS time. During this period, the VTO can only call VTS.
To Next Page
Loading...
