11
Add Figure 4-7
Set indoor monitor (VTH) parameters by reference to Table 4-2. Step 3
Table 4-2 Descriptions of adding indoor monitors (VTH)
Set username and nickname for each indoor monitor (VTH).
Set room number at the indoor monitor (VTH).
Indoor monitor (VTH) short number consists of 1–5 numbers, which
includes numbers and "#". It shall be the same as the room number
configured at indoor monitor (VTH).
When there are master indoor monitors (VTH) and extensions, to
realize group call function, master indoor monitor (VTH) short No.
shall end with "#0", and extension VTH short No. shall end with #1, #2
and #3. For example, if master indoor monitor VTH No. is 101#0,
extension numbers will be 101#1, 101#2…
Keep the default value to enable signaling interactive in the SIP system.
Click Save to complete adding. Step 4
Repeat these steps to add more indoor monitors.
Adding Indoor Monitors (VTH) in Batch
Select Household Setting > Room No. Management. Step 1
To Next Page
Loading...