Daikin Altherma 3 HT - Page 135

10 | Configuration
Installer reference guide
135
EPRA14~18D + ETVH/X16S18+23E
Daikin Altherma 3 H HT F
4P644737-1A – 2022.03
For the setting… Refer to…
Hours —
Minutes
Year
Month
Day
System
Indoor unit type (read only) "10.5.9Installer settings"[4194]
Backup heater type [9.3.1]
Domestic hot water [9.2.1]
Emergency [9.5]
Number of zones [4.4] "10.5.5Space heating/
cooling"[4171]
Glycol Filled system (overview
field setting [E‑0D])
"10.5.9Installer settings"[4194]
Booster heater capacity [9.4.1]
(if applicable)
Backup heater
Voltage [9.3.2] "Backup heater"[4196]
Configuration [9.3.3]
Capacity step 1 [9.3.4]
Additional capacity step 2
[9.3.5] (if applicable)
Main zone
Emitter type [2.7] "10.5.3Main zone"[4156]
Control [2.9]
Setpoint mode [2.4]
Heating WD curve [2.5] (if
applicable)
Cooling WD curve [2.6] (if
applicable)
Schedule [2.1]
WD curve type [2.E]
Additional zone (only if [4.4]=1)