Instruction SiBE04-809
54 Operation Manual
9
To set the clock
1. Press “CLOCK button”.
is displayed.
blinks.
2. Press “TIMER setting button” to
set the clock to the present time.
Holding down “ ” or “ ” button rapidly
increases or decreases the time display.
3. Press “CLOCK button”.
blinks.
NOTE
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them once in about every two weeks.
Please note
• The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
• Use the air conditioner in the following conditions.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
1, 3
2
Recommended temperature setting
For cooling:26
°
C – 28
°
C
For heating:20
°
C – 24
°
C
Mode Operating conditions If operation is continued out of this range
COOL
Outdoor temperature:〈2MXS40〉 10 to 46˚C
〈2MXS52〉 –10 to 46˚C
〈3/4/5MXS〉 –10 to 46˚C
〈RXG〉 10 to 46˚C
Indoor temperature: 18 to 32˚C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
HEAT
Outdoor temperature:〈2MXS40〉 –10 to 15.5˚C
〈2MXS52〉 –15 to 15.5˚C
〈
3/4/5MXS
〉
–15 to 15.5˚C
〈RXG〉 –15 to 20˚C
Indoor temperature: 10 to 30˚C
• A safety device may work to stop the operation.
DRY
Outdoor temperature:〈2MXS40〉 10 to 46˚C
〈2MXS52〉 –10 to 46˚C
〈3/4/5MXS〉 –10 to 46˚C
〈RXG〉 10 to 46˚C
Indoor temperature: 18 to 32˚C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
To Next Page
Loading...
Need help?
General
