English 11
2
On/Off
u
Press ● On/Off button.
The Operation lamp (green) will
illuminate and the system will start
operating.
3
Cool
Return Setting
Set to
74F
The setpoint will increase by ●
1°F (or 1°C) when button is pressed
and decrease by 1°F (or 1°C) when
button is pressed.
Setpoint is not available in fan or dry mode.*
4
Cool
Return Setting
Set to
74F
Low Medium
High
Auto
A
To change the fan speed, press the ● Fan
speed control button and select the
desired fan speed from Low, Medium,
High, or Auto.
Depending on the type of indoor unit, the adjustment levels may *
be two levels of “Low” and “High” or three levels of “Low”,
“Medium”, and “High”.
The system may be in automatic fan speed control for equipment *
protection purposes.
The system may be in automatic fan speed control according to *
the room temperature. It is normal for the fan to intermittently stop
operating.
It is normal for a delay to occur when changing the fan speed.*
In auto mode setting, the fan speed setting is adjusted *
automatically according to setpoint and indoor temperature. In
Fan mode, the fan speed setting is always at High.
5
Adjust Airfl ow Direction from the main menu ●
(see page 23).
If the connected indoor unit model does not include oscillating *
louvers this function will not be available.
01_EN_3P243520-3E.indd 1101_EN_3P243520-3E.indd 11 9/11/2012 4:12:40 PM9/11/2012 4:12:40 PM
To Next Page
Loading...
