Why did my Daikin D-Series Air Conditioner stop suddenly with the OPERATION lamp on?
The air conditioner might stop operating due to a sudden large voltage fluctuation, as a system protection measure. It will automatically resume operation in about 3 minutes.
What to do if my Daikin D-Series Air Conditioner operation stopped suddenly?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a large voltage fluctuation, which triggers system protection. The unit will automatically resume operation in about 3 minutes.
Why is my Daikin D-Series Air Conditioner outdoor unit leaking water?
The water or steam emitted from the outdoor unit of your Daikin Air Conditioner is due to moisture in the air condensing on the cool surface of the outdoor unit's piping, which then drips as water.
What to do if my Daikin Inverter operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Inverter stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. After that, turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
Why does my Daikin D-Series Air Conditioner not start right away?
If your Daikin Air Conditioner doesn't start immediately after pressing the ON/OFF button soon after stopping it or reselecting the mode, this is normal. You should wait approximately 3 minutes for the system to restart.
Why does the outdoor fan rotate when my Daikin D-Series Air Conditioner is not in operation?
When the outdoor temperature is very high, the outdoor fan starts rotating for system protection.
Why do mists come out of the indoor unit of my Daikin D-Series?
This happens when the air in the room is cooled into mist by the cold air flow during cooling operation.
How to handle odour from the indoor unit of my Daikin Air Conditioner?
If this happens, we recommend you have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
Why doesn't hot air flow out immediately from my Daikin D-Series Air Conditioner after starting the heating operation?
The air conditioner is warming up. You should wait for 1 to 4 minutes.
Why my Daikin D-Series Air Conditioner operation does not start immediately?
If the ON/OFF button was pressed soon after the operation was stopped, or when the mode was reselected, you should wait for about 3 minutes.
General| HSPF Rating | Up to 10.0 |
|---|---|
| Cooling Capacity | 9, 000 - 36, 000 BTU/h |
| Heating Capacity | 9, 000 - 36, 000 BTU/h |
| Energy Efficiency Ratio (EER) | Up to 12.5 |
| Sound Level | 19 - 50 dB (Indoor), 49 - 60 dB (Outdoor) |
| Noise Level | 19 - 50 dB (Indoor), 49 - 60 dB (Outdoor) |
| Power Supply | 208/230V, 1-phase, 60Hz |
Technical specifications for various models, including cooling and heating capacities.
Detailed technical specifications for models in cooling-only mode.
Detailed technical specifications for models in heat pump mode.
Illustrates the wiring connections for PCBs in different unit types.
Wiring diagrams for the outdoor unit's control and inverter PCBs.
Lists connectors and their functions on the outdoor unit's control PCB.
Important precautions and guidelines for diagnosing issues.
How to troubleshoot based on the status of the operation lamp.
Troubleshooting guide for LEDs on SkyAir indoor units.
Troubleshooting guide for LEDs on the outdoor unit.
Troubleshooting guide for LEDs on the BP unit.
To Next Page
