To Next Page
S
Sheri RyanAug 31, 2025
Why doesn't hot air flow out immediately from my Daikin D-Series Air Conditioner after starting the heating operation?
- PPatricia HollowayAug 31, 2025
The air conditioner is warming up. You should wait for 1 to 4 minutes.
Why doesn't hot air flow out immediately from my Daikin D-Series Air Conditioner after starting the heating operation?
The air conditioner is warming up. You should wait for 1 to 4 minutes.
Why did my Daikin D-Series Air Conditioner stop suddenly with the OPERATION lamp on?
The air conditioner might stop operating due to a sudden large voltage fluctuation, as a system protection measure. It will automatically resume operation in about 3 minutes.
Why my Daikin D-Series Air Conditioner operation does not start immediately?
If the ON/OFF button was pressed soon after the operation was stopped, or when the mode was reselected, you should wait for about 3 minutes.
What to do if an abnormality (such as a burning smell) occurs in Daikin Inverter?
If you notice an abnormality, such as a burning smell, stop the Daikin Inverter operation immediately and turn the breaker OFF.
Why is the Daikin D-Series Air Conditioner outdoor fan running when it's off?
The outdoor fan in your Daikin Air Conditioner may continue rotating for about 60 seconds after operation stops to protect the system. Additionally, if the outdoor temperature is very high, the fan might start rotating even when the air conditioner is not in operation, also for system protection.
What to do if the Daikin Ventilation operation stopped suddenly, but the OPERATION lamp is on?
If the Daikin Ventilation operation stops suddenly and the OPERATION lamp is on, it may be due to a large voltage fluctuation. For system protection, the air conditioner might stop. It will automatically resume operation in about 3 minutes.
Why does Daikin Ventilation operation does not start soon?
If the Daikin Ventilation operation does not start soon, it could be due to these reasons: * When the ON/OFF button was pressed soon after operation was stopped: You should wait for about 3 minutes. * When the mode was reselected: You should wait for about 3 minutes.
Why hot air does not flow out soon after the start of heating operation of Daikin Inverter?
You should wait for 1 to 4 minutes after starting the heating operation of your Daikin Inverter.
What to do if my Daikin Inverter operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Inverter stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. After that, turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
Why is my Daikin D-Series Air Conditioner outdoor unit leaking water?
The water or steam emitted from the outdoor unit of your Daikin Air Conditioner is due to moisture in the air condensing on the cool surface of the outdoor unit's piping, which then drips as water.
Technical specifications for various models, including cooling and heating capacities.
Detailed technical specifications for models in cooling-only mode.
Detailed technical specifications for models in heat pump mode.
Illustrates the wiring connections for PCBs in different unit types.
Wiring diagrams for the outdoor unit's control and inverter PCBs.
Lists connectors and their functions on the outdoor unit's control PCB.
Important precautions and guidelines for diagnosing issues.
How to troubleshoot based on the status of the operation lamp.
Troubleshooting guide for LEDs on SkyAir indoor units.
Troubleshooting guide for LEDs on the outdoor unit.
Troubleshooting guide for LEDs on the BP unit.
General| HSPF Rating | Up to 10.0 |
|---|---|
| Cooling Capacity | 9, 000 - 36, 000 BTU/h |
| Heating Capacity | 9, 000 - 36, 000 BTU/h |
| Energy Efficiency Ratio (EER) | Up to 12.5 |
| Sound Level | 19 - 50 dB (Indoor), 49 - 60 dB (Outdoor) |
| Noise Level | 19 - 50 dB (Indoor), 49 - 60 dB (Outdoor) |
| Power Supply | 208/230V, 1-phase, 60Hz |
