Daikin DR80TC - Dimensions; Minimum Clearances to Combustible Materials

     5
DR80TC Dimensions
Minimum Clearances to Combustible Materials
   


SW B
1 0 3 C  1 1
C = If placed on combusble oor, the oor MUST be wood ONLY.
Notes
• For servicing or cleaning, a 24” front clearance is recommended.
• Unit connecons (electrical, ue, and drain) may necessitate greater clearances than the minimum clearances listed above.
• In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility c
learances are greater.
• Refer to the appropriate USA and Canadian codes:
In the USA: the Naonal Fuel Gas Code NFPA 54 / ANSI Z223.1
In Canada: the Canada Naonal Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2
 

W D H A B
   
 
     
     
     
     
  28"   23"
     
13-1/4"
20"
30-1/4"
1-3/4"
28"
A
33-3/8"
23-5/16"
1-31/32"
22"
15"
B
19-1/2"
ALT. GAS INLET
HIGH-VOLTAGE INLET
LOW-VOLTAGE INLET
ALT. FLUE OUTLET - HORIZONTAL LEFT
ALT. GAS INLET
ALT. HIGH VOLTAGE
ALT. LOW VOLTAGE