Daikin ENVi - Reset Equipment or User Settings

Tstat Temp Correction
Lets you program an oset between the
real temperature at the thermostat and the
displayed temperature. If you nd that the
temperature where the thermostat is located
does not represent the room temperature,
change the oset to compensate for the
dierence. The correct temperature is adjustable
from +/- 10°F (+/-5 .6°C) in 0.5°F (0.3°C)
increments.
Installer Code
To prevent accidental modications to the
installation settings, you can enable the
following installer code: 3262. The code is xed
and cannot be changed.
Reset Equipment or User Settings
You can restore equipment or user settings on
the Daikin ENVi thermostat back to their factory
defaults.
Reset Registration Resets the connection
between the Daikin ENVi thermostat and the
user’s personalized Web Portal.
Preferences and Schedule Resets
all preferences, reminders, alerts and
programming back to the default state.
HVAC Equipment Settings Resets the
conguration of the Indoor Unit and/or
auxiliary heat equipment.
All Settings Resets the Daikin ENVi
thermostat back to its default factory
settings.
To reset the Daikin ENVi
thermostat:
From the Home screen,
press MENU.
Select Settings ▶ Reset.
Select the desired reset
method.
22