15 Relocation
Installation and operation manual
36
EWAQ016~064CAW + EWYQ016~064CAW
Packaged air-cooled water chiller
4P489435-1B – 2017.10
Malfunction Measure
The schedule timer
works, but the
programmed actions
are executed at the
wrong time.
Check if the clock and the day of the week
are set correctly, and correct if necessary.
The schedule timer is
programmed, but does
not work.
In case is not displayed, push to
enable the schedule timer.
Capacity shortage. Consult your local dealer.
Temperature values on
the remote controller
are displayed in °F
instead of in °C.
To switch the display between °C and °F,
push and simultaneously for
5seconds. The default temperature display
is in °C.
If after checking all above items, it is impossible to fix the problem
yourself, contact your installer and state the symptoms, the complete
model name of the unit (with manufacturing number if possible) and
the installation date (possibly listed on the warranty card).
14.1 Error codes: Overview
In case a malfunction code appears on the indoor unit user interface
display, contact your installer and inform the malfunction code, the
unit type, and serial number (you can find this information on the
nameplate of the unit).
For your reference, a list with malfunction codes is provided. You
can, depending on the level of the malfunction code, reset the code
by pushing the ON/OFF button. If not, ask your installer for advice.
15 Relocation
Contact your dealer for removing and reinstalling the total unit.
Moving units requires technical expertise.
16 Disposal
This unit uses hydrofluorocarbon. Contact your dealer when
discarding this unit.
NOTICE
Do not try to dismantle the system yourself: the dismantling
of the system, treatment of the refrigerant, oil and other
parts must comply with applicable legislation. Units must
be treated at a specialised treatment facility for reuse,
recycling and recovery.
To Next Page
Loading...
