Procedure to Remove Heat Exchanger Si211309E
10 Removal Procedure
8. Procedure to Remove Heat Exchanger
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
∗Before dismounting a heat
exchanger, make sure to
proceed pump down
refrigerant to outdoor unit and
disconnect the connection
pipe and wiring, then remove
the indoor unit.
1
Dismount top plate.
2
Remove the 3 setting
screws for heat
exchanger and 1 screw
for pipe fixing box.
There is a hock right hand side
behind the heat exchanger.
Top plate
Pipe fixing box
To Next Page
Loading...
