FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E
367
3P202922-2B
15
Cleaning
Cleaning the remote controller
� Wipe it clean with soft, dry cloth.
Do not use any water hotter than 40°C (104°F), or volatile liquids such as benzine, gasoline and
thinner, polishing powder, or anything hard such as a scrub brush.
When the unit is not used for a long time
On a sunny day, keep the system running for
half a day in the FAN mode to dry it up inside.
3
12
FAN mode
1 Press to select the cooling
mode
.
2 Press
to adjust the set
temperature to 32°C (90°F).
3 Press .
� The airflow rate remains the same, and is not
adjustable.
� Run the system when the room temperature
is below 28°C (82°F).
Finally turn off the circuit breaker dedicated fo
r
the room air conditioner.
Clean the air filter and place it back into
position.
To Next Page
Loading...
Need help?
General
