SiENBE04-512A Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C
Removal Procedure 209
3.7 Removal of Compressor
Procedure Warning Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Step Procedure Points
1. Remove the parts around
the compressor.
Preparation
Remove the compressor
sound insulation pad
according to the removal of
compressor sound
insulation pad.
1
Remove the terminal
cover by removing the
hexagonal nut.
2
Disconnect the
compressor lead wire.
Terminal cover
Hexagoual
nut
Rubber
packing
(R4567)
W (Blue)
Compressor lead wire
Compressor protective
thermostat
V (Yellow)
U (Red)
(R4506)
SiENBE04-512A.book Page 209 Friday, October 5, 2007 1:49 PM
To Next Page
Loading...