SiBE041525F Indoor Unit
Printed Circuit Board Connector Wiring Diagram 8
Display PCB
(PCB2)
Note: The symbols in the parenthesis are the names on the appropriate wiring diagram.
Remote Control
PCB (BR069)
1) S27 Connector for control PCB
2) SW1 (S1W) Forced cooling operation ON/OFF button
* Refer to page 91 for details.
3) LED1 (H1P) LED for operation (green)
4) LED2 (H2P) LED for timer (yellow)
5) RTH1 (R1T) Room temperature thermistor
S27
SW1
(Solder side)
LED2 LED1
RTH1
3P185701-4
LED3 is not mounted.
S602
S21
To connector S403 of control PCB (PCB1)
S601
To optional wired
remote controller
BRC073 and
BRP069
To Next Page
Loading...
