What to do if the power cord of Daikin Air Conditioner is abnormally hot or damaged?
- AAmanda JonesSep 5, 2025
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, it's recommended to immediately call the service shop.
What to do if the power cord of Daikin Air Conditioner is abnormally hot or damaged?
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, it's recommended to immediately call the service shop.
What to do if a switch or a button often fails to work properly on Daikin FTXB20C2V1B?
If a switch or button on your Daikin Air Conditioner often fails to work properly, it's recommended to immediately call the service shop.
What to do if the safety breaker cuts off the operation of Daikin Air Conditioner frequently?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation of your Daikin Air Conditioner frequently, it's recommended to immediately call the service shop.
What to do if abnormal functioning happens during Daikin Air Conditioner operation?
If you're experiencing an abnormal functioning during the operation of your Daikin Air Conditioner, turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
Why is a sound heard from Daikin FTXB20C2V1B?
The sound you hear in your Daikin Air Conditioner is generated because the refrigerant is flowing. Another possible cause is the pumping sound of water, which is heard when water is pumped out during cooling or drying operation. Also, this sound is generated when the flow of the refrigerant is switched over. This sound is generated when the size of the air conditioner slightly expands or shrinks as a result of temperature changes. This sound is generated when the refrigerant control valves or the electrical parts operate. This sound is heard from the inside of the air conditioner when the exhaust fan is activated while the room doors are closed, in that case open the window or turn off the exhaust fan.
Why does mist come out of the indoor unit of Daikin Air Conditioner?
If mist comes out of the indoor unit of your Daikin Air Conditioner, this happens when the air in the room is cooled into mist by the cold airflow during COOL operation. Also, this is because the air in the room is cooled by the heat exchanger and becomes mist during defrosting operation.
Brand | Daikin |
---|---|
Model | FTXB20C2V1B |
Category | Air Conditioner |
Language | English |
Covers critical warnings, cautions, and environmental/usage guidelines for safe operation.
Details on installation site, noise, electrical work, and system relocation for safe setup.
Identifies and describes the parts of the indoor unit.
Identifies and describes the parts of the outdoor unit.
Details the functions and display of the remote controller.
Instructions for setting batteries, operating, and mounting the remote controller.
Guidance on turning on the breaker and tips for energy saving during operation.
How to start, stop, and change temperature for basic operation modes.
How to adjust the fan speed for different operation modes.
Instructions for adjusting the swing and setting the flap to a desired position.
How to manually adjust the vertical louvers for optimal air direction.
How to activate and cancel the comfort airflow feature for personalized comfort.
How to use the POWERFUL mode for maximum cooling or heating effect.
How to use ECONO mode for efficient operation and limited power consumption.
How to set and cancel the OFF timer for automatic shut-off.
How to set and cancel the ON timer for automatic start-up.
Instructions for cleaning the indoor unit's front panel and the remote controller.
Procedures for cleaning and replacing air filters and purifying filters.
Guidance on regular checks, preparing for long periods of non-use, and refrigerant info.
Addresses issues like flap not swinging, heat operation stopping, and no operation.
Explains common sounds like water flow, blowing, pinging, and clicking.
Troubleshooting for sudden stops, no operation, outdoor unit steam, and mist.
Solves problems with remote controller malfunction and indoor unit odors.
How to perform fault diagnosis using the remote controller and interpret error codes.