ESIE16-02K | Part 2. Troubleshooting 2.1. Error codes check
Page 18 31/05/21 | Version 1.1
RA R32 Split & multi split M-Series
- Press “ON/OFF” button for 5 sec.
4. Power OFF and power ON the unit.
5. Go to “trial operation” (as explain in the manual):
- Press “TEMP” and “MODE” buttons at the same time.
- Press “MODE” button 2 times and you will see 7 on the screen of the remocon.
6. Power OFF and power ON the unit.
7. Normal unit operation.
2.1.1.3. History of error codes
Not applicable for this remote controller.
To Next Page
Loading...
