Daikin FTXP-N9 - Operating the Remote Control

3 | About the system
User reference guide
13
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
Icon Description
Operation mode = Fan only
Powerful operation is active
Econo operation is active
The indoor unit receives a signal from the wireless remote
control
Current temperature setting
Airflow rate = Automatic
Airflow rate = Indoor unit quiet
Airflow rate = High
Airflow rate = Medium high
Airflow rate = Medium
Airflow rate = Medium low
Airflow rate = Low
Comfort operation is active
Automatic vertical swing is active
Automatic horizontal swing is active
ON timer is active
OFF timer is active
3.2.3 To operate the wireless remote control
a
a Infrared signal receiver
1 Aim the signal transmitter at the infrared signal receiver on the indoor unit
(maximum distance for communication is 7m).
Result: When the indoor unit receives a signal from the wireless remote control,
you will hear a sound:
Sound Description
Beep-beep Operation starts.
Beep Setting changes.
Long beep Operation stops.