Need help?Do you have a question about the Daikin FTXP35N5V1B and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Outdoor Unit) | 32 kg |
| Refrigerant | R-32 |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Coefficient of Performance (Heating) | 3.61 |
| Outdoor Unit Weight | 32 kg |
| Outdoor Unit Noise Level | 48 dB(A) |
Details requirements for the installation site, including ventilation, weight, and forbidden locations.
Covers warnings related to piercing/burning refrigerant parts and cleaning materials.
Outlines minimum floor area requirements for rooms containing R32 refrigerant units.
Details risks associated with pump-down procedures and refrigerant leaks.
Guides on charging liquid refrigerant, cylinder orientation, and opening cylinders.
Details critical electrical safety measures, including power disconnection and touching components.
Provides cautions for connecting and disconnecting power supply, emphasizing earth connection order.
Warns against exceeding maximum allowable pressure during tests.
Warns about closing refrigerant tank valves promptly to avoid incorrect charging.
Advises on wiring thickness, connection methods, and screw tightening.
Provides general safety instructions for installers, including warnings about electrical shock and material handling.
Advises on ventilation and potential risks of refrigerant gas leaks.
Reminds to confirm connections and close covers before startup.
Reiterates that R32 refrigerant is mildly flammable.
Covers brazing, welding, and site-made joints for R32 refrigerant.
Emphasizes authorized electricians, national wiring regulations, and proper earthing.
Details electrical safety during servicing, including voltage checks.
Safety instructions for servicing the compressor, including grounding and power off.
States that installation must comply with legislation, including EN378 in Europe.
Provides notices on using flare nuts, applying oil, and not reusing joints.
Specifies using multicore cables for power supply.
Safety measures for finishing indoor unit installation, like earthing and cover replacement.
Advises on checking wall strength, service space, and avoiding contact with surfaces.
Advises against using mineral oil, reusing piping, or installing driers.
Recommends using specific all-pole disconnection type breakers.
Safety precautions during commissioning, including test operation hazards.
Safety measures when removing the compressor, using pipe cutters and approved refrigerants.
Details safety for charging refrigerant, including fire risks and protective gear.
Safety advice for maintenance, including power disconnection and touching live parts.
Safety notes for troubleshooting, including disconnecting power and not bypassing safety devices.
Warns that the refrigerant inside is mildly flammable.
Covers precautions for mixing refrigerants, using correct tools, and protecting pipes.
Includes DANGER and NOTICE regarding flare nuts, oil, and reused joints.
Covers precautions for electrical wiring preparation, including power supply and earthing.
Reiterates electrical shock risks and compliance with regulations.
Emphasizes authorized electricians, national wiring regulations, and proper earthing.
Repeats the recommendation to use multicore cables.
A checklist of items to verify before starting the system.
To Next Page
