5 Operation
Operation manual
14
CVXM20+FVXM25~50A2V1B
Split system air conditioners
3P477071-2F – 2020.06
Result: Remaining reservations are active.
To delete a reservation for each day of the week
Use this function if you want to delete all reservation settings for one
day of the week. This can be used in confirmation or setting mode.
1 Press .
2 Press or to select the day of the week to be deleted.
3 Hold for about 5seconds.
Result: All reservations for the selected day are deleted.
4 Press to exit.
Result: Remaining reservations are active.
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1 Hold for about 5seconds while in the default display.
Result: All reservations will be deleted.
5.12 Wireless LAN connection
The customer is responsible for providing:
▪ Smartphone or tablet with minimum supported version of Android
or iOS, specified on http://www.onlinecontroller.daikineurope.com
▪ Internet line and communication device, such as a modem, router,
etc.
▪ Wireless LAN access point
▪ Installed free Daikin Residential Controller application
5.12.1 Precautions when using the wireless LAN
Do NOT use near:
▪ Medical equipment. E.g. persons using cardiac pacemakers or
defibrillators. This product may cause electromagnetic
interference.
▪ Auto-control equipment. E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
▪ Microwave oven. It may affect wireless LAN communications.
5.12.2 To install the Daikin Residential Controller
application
1 Open:
▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.
2 Search for Daikin Residential Controller.
3 Follow the directions on the screen to install.
5.12.3 To set the wireless connection
There are two options to connect the wireless adapter with your
smart device.
▪ Connect the wireless LAN to your smart device directly.
▪ Connect the wireless LAN to your home network. The wireless
LAN will communicate with your smart device in your home
network using a modem, router or a similar device.
For more information and FAQ refer to:
http://www.onlinecontroller.daikineurope.com/.
1 Stop operation before setting the wireless connection.
2 Use the user interface to select the wireless LAN setting menu.
Note: Always aim the user interface at the signal receiver on the
unit when operating the user interface.
Menu Description
Connection status check
WPS connection setting
AP mode/RUN mode (SSID + KEY) connection
setting
Reset to factory default
Wireless LAN OFF
To confirm the wireless LAN connection status
1 On the home screen, press for at least 5seconds while the
unit is not operating.
Result: SP appears on the display. is blinking.
2 Press to confirm the selection.
Result: is blinking.
3 Check the Daikin eye.
a Daikin eye
b Partly green
c Red, orange, blue or white
Daikin eye colour alternates
between partly green and…
…then wireless adapter is…
red not connected
orange running and ready to connect to
the home network via WPS
button; see "To connect using
the WPS button"[415].
blue ▪ connected to the home
network via SSID + KEY.
or
▪ connected to the home
network via WPS button on the
router.
white off
4 Press to exit the menu.
Result: The display will return to the home screen.
To connect the wireless LAN to your home
network
The wireless adapter can be connected to your home network using
the:
▪ WPS button on the router (if present),
▪ SSID and KEY number located on the unit.