Daikin intelligent touch Controller DCS601C51 - Set Ventilation Volume

24
Screen 1 Monitoring
Screen 2 Operation
Set Ventilation Volume
1
4
5
3
2
1.
On the Monitoring Screen Screen 1,
select a zone or group by pushing the
button q .
∗ Not all models permit the above settings.
2.
To select a zone or group subject to
ventilation volume switching, push the
icon w.
3.
4.
Select a desired ventilation volume on
the pull-down menu r.
5.
Lastly, push [OK] button t.
To cancel above settings, press
[Cancel] button.
[Procedure]
Push [Configure] button e to display
the Operation Screen Screen 2.
Perform the following procedure to change
the ventilation volume:
On the monitoring screen, you can select
any of the following display types:
Icon, Detailed Icon, or List.
When changing the ventilation volumes of all
the ventilation groups of a zone, select the
zone and switch the ventilation volume.
When changing the ventilation volume of a
group, select the group and switch the
ventilation volume.
Operation