Daikin intelligent touch Controller DCS601C51 - Page 65

Screen 1 Passwords
1.
Select Passwords at Screen 2(A) on
page 63.
2.
Screen 1 Passwords, which is shown
on the left, appears.
3.
Select Enabled or Disabled for
password Protection q.
If Disabled is selected, press the [Close]
button w. The setting is completed.
If Enabled is selected, Screen 2 Enter
Password appears.
Perform following operation in 4 to 7.
4.
Use the keyboard on the panel to enter
the password.
5.
System Settings Menu Operation
Screen 2 Enter Password
6.
For confirmation, Please confirm
Password screen appears. Enter the
password as described in 4. Screen 3
appears.
7.
Pressing the [Close] button y
completes the setting.
MEMO: To change the password, press the
[Modify Password] button u and
repeat the operation in 4 - 7 above.
NOTE: Password is case-sensitive (see r).
Use caution and enter the exact
password.
A password can be as long as 32
characters.
When a wrong character is entered
by mistake, press the [Back Space]
button t.
∗ Password setting is possible in the same
way both in Administrator password
protect and Screen Lock Password.
Screen 3 Passwords
Passwords
1
3
1
2
4
5
7
6
Pressing the [Cancel] button is equal
to setting Disabled for Password
Protection.
When the setting has been made, press
the [OK] button e .
64
Operation