Si01-501 Instructions
System Configuration 57
6
Remote Controller
1. Signal transmitter:
•
It sends signals to the indoor unit.
2. Display:
• It displays the current settings.
(In this illustration, each section is shown
with all its displays ON for the purpose of
explanation.)
3. POWERFUL button:
POWERFUL operation (page 14.)
4. TEMPERATURE adjustment buttons:
• It changes the temperature setting.
5. ON/OFF button:
•
Press this button once to start operation.
Press once again to stop it.
6. MODE selector button:
• It selects the operation mode.
(DRY/COOL/FAN) (page 10.)
7. FAN setting button:
• It selects the air flow rate setting.
8. SWING button:
•
Adjusting the Air Flow Direction. (page 12.)
9. ON TIMER button: (page 16.)
10. OFF TIMER button: (page 15.)
11. TIMER Setting button:
• It changes the time setting.
12. TIMER CANCEL button:
• It cancels the timer setting.
13. CLOCK button: (page 9.)
14. RESET button:
• Restart the unit if it freezes.
• Use a thin object to push.
TEMP
ON/OFF
POWERFUL
MODE
FAN
SWING
SILENT
SENSOR
ECONO
MOLD PROOF
TIMER
ON
CANCEL
OFF
C
ON
1
2
4
5
7
8
12
14
13
9
11
10
<
ARC433A55
>
3
6
To Next Page
Loading...
