Outdoor Unit Si181180
12 Removal Procedure
1.3 Removal of Outdoor Fans / Fan Motors
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
Preparation
Remove the discharge grille,
front panels (1) and (2), and
piping cover (front),
according to the "Removal of
Outer Panels".
1
Remove the nuts which
fixing the outdoor fan.
Nut size : M8
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
Front panel (1)
(R9241)
Discharge
grille
Outdoor fan
Nut with a washer
(R12974)
13 mm
(R12301)
To Next Page
Loading...
Need help?
General
